Carbon Black Content Tester

Carbon Black Content Tester

Standard:

ASTM D1603-2012

Description:

The content of carbon black is an important technical index in the product performance. The content of carbon black has certain influence on the hardness, elasticity, abrasion resistance and insulation of the material.

The measurement of carbon black was obtained by gravimetric analysis of samples decomposed at high temperature under the protection of nitrogen.

The instrument is easy to use, simple to operate, reliable, accurate measurement, automatic temperature control and other advantages.The instrument is suitable for the determination of carbon black content in polyethylene, polypropylene and polybutene plastics.

Feature：

1. The furnace door is automatically lifted to accelerate the speed of heat dissipation, avoid scald caused by human operation, and facilitate the sample placement and determination of the position of the sample.

2. 4 samples can be tested simultaneously. (Optional crucible)

3. The user can replace the float flow meter in corresponding flow range according to their own needs.

4. 8 inch LCD touch screen display, very friendly operation interface, can be started with one button operation.

5. You can fill in the corresponding data on the screen and calculate the percentage of carbon black and ash content.

6. The setting parameters and heating or constant temperature time can be checked during the operation of the instrument.

7. Touch screen controls gas switching.

8. High degree of automation, only need to set the temperature value and heating time, the instrument automatically heating to the set value.

9. The instrument can be set for any group of different heating periods, with different heating temperature, heating rate and constant temperature time.

10. High temperature control precision, large temperature range, high temperature uniformity in the furnace.

Specification：