Middle Pressure Filter Press six gang
Description:
The six unit intermediate pressure filtration tester can conduct parallel tests on multiple samples. The sd6b multi unit intermediate pressure filtration tester uses stainless steel drilling fluid cups, and the sd6 multi unit intermediate pressure filtration tester uses aluminum drilling fluid cups. The rated working pressure is 0.69mpa, the effective filtration area is 45.6cm2, and the drilling fluid cup capacity is 240ml. It is equipped with an air source device such as a pump, or a low-pressure manifold (optional) and a nitrogen cylinder for use in the laboratory.
The medium pressure filtration instrument is used to simulate the filtration and cake formation characteristics of drilling fluid under static conditions in the well. Under the action of pressure difference, the drilling fluid will have filtration, that is, the free water in the drilling fluid will permeate into the pores or cracks of the borehole wall rock.
Model and specification：
Six sets of stainless steel drilling fluid cups for sd6b six unit medium pressure filtration tester
Six sets of aluminum drilling fluid cups (optional stainless steel cups) for sd6 six unit medium pressure water loss instrument
Main technical parameters：
Filtration area: 45.6cm2
Working pressure: 0.69mpa
Limit pressure of drilling fluid cup: 1MPa
Injection volume of drilling fluid cup: 240ml
![Gina WeChat](javascript:Site.hoverQrCode("//50005592.s21i.huaweicloudsite.cn/2/ABUIABACGAAgiajntQYo_rqRxgMw6AI46AI.jpg",this,{"tips":"Scan QRcode"});){kind=link}