T Bend Tester 1

Wzj-ii t bending machineIt is mainly used for bending performance test of color steel and aluminum plate, with compact structure, simple

appearance and convenient use.How to useInsert one end of the sample for about 10 mm, press the sample tightly, and turn the handle to bend the sample to an acute angle.Take out the sample, insert it into the vise, and press the bent part of the sample tightly, which is regarded as 0t bending.Check whether there is crack on the coating, and the coating within 5 mm from the edge will not be considered.Stick the transparent tape along the curved surface, tear off the tape along the 60 ° direction of the curved surface, and check whether there is any peeling coating.The sample continues to bend 180 ° around the 0t bending part, and the folding center is 1t bending.Repeat the above steps until you see the desired result.

Specification: