Triplex Consolidation Apparatus High Pressure
Executive standards:
GB/T 4935.1-2008 Geotechnical Test Instruments - Oedometer - Part 1: Single Lever Oedometer
Product introduction:
This instrument is used for soil compression test, to determine the relationship between soil deformation and pressure, or between void ratio and pressure, as well as the relationship between deformation and time, to calculate the unit settlement, compression coefficient and index, resilience index, compression modulus, consolidation coefficient, etc. The measurement items are determined according to the needs of the factory. It is a high pressure oedometer following the low pressure and medium pressure oedometers. It can be used for low voltage test, medium voltage test and high voltage test.
Product structure:
This machine is mainly composed of compression vessel (see Figure 1) and pressurizing equipment (see Figure 2). At the same time, three groups of tests can be carried out, and the bearing structure is used as the stress point.
Specification:
Sample area | 30cm2 and 50cm2 |
Lever ratio | 24:1 and 20:1 |
Load forming | weight |
Maximum pressure | 4000Kpa (30cm2) 2000Kpa (50cm2) |
Pressure range | 12.5Kpa-4000Kpa |
![Gina WeChat](javascript:Site.hoverQrCode("//50005592.s21i.huaweicloudsite.cn/2/ABUIABACGAAgiajntQYo_rqRxgMw6AI46AI.jpg",this,{"tips":"Scan QRcode"});){kind=link}