Concrete corrosion resistivity detector

1. Two test methods are used to measure the corrosion degree of reinforcement inside the concrete. The half-cell potential method and resistivity method are applicable to different test sites, and the two test results can be mutually verified to further determine the internal corrosion degree of concrete.2. Permanent reference electrode is used for corrosion test. The saturated copper sulfate solution is sealed in the reference electrode. There is no need to change the solution before and after the test. The operation process is simple, clean, and pollution-free.3. The corrosion test automatically detects the ambient temperature. The instrument contains an automatic temperature measurement module, which can automatically test, record and display the ambient temperature of the site without the need for additional thermometer, which is convenient and fast.4. The resistivity test method is simple. Using the traditional four-electrode method (Winner four-electrode method), the sponge plug sensor ensures good electrical contact and can be tested on its surface without damaging or drilling the concrete;      5. Including standard block. There is a standard test block to ensure the reliability of the measurement results;6. The instrument can set the test date. Data storage test date, convenient for user data management;7. Powerful professional windows data analysis and processing software. The test results are represented by graphical images (spectrogram, isoline, etc.), which can directly generate Word test reports or import data into Excel, which is convenient and fast.

Parameters: