Digital Ceramic Water Absorption Tester
Description:
The instrument is capable of measuring water absorption, apparent porosity, apparent relative density, and bulk density. The vacuum method is used to measure the water absorption, apparent porosity, and bulk density of daily-use ceramics, building and sanitary ceramics, electrical ceramics, and refractory materials. It also meets the measurement conditions of GB/T3299-2011 "Determination method for water absorption rate of daily ceramic ware".
The instrument adopts an electromechanical integrated structure, consisting of a vacuum container, a water circulation vacuum pump, an inlet solenoid valve, a drain valve, and a water container. The water circulation vacuum pump has special advantages such as low operating noise, low damage, and low power consumption, which make the instrument have superior performance.
Specification:
Vacuum degree | ≥ 0.09Mpa can be set |
Vacuum holding time | 0-120 minutes continuously adjustable |
Water injection time | 0-99 minutes and 59 seconds continuously adjustable |
Soaking time | 0-99 minutes and 59 seconds, continuously adjustable |
Volume | Φ 300 × 330mm |
Power supply | 220V 50hz |
Power | 300W |
![Gina WeChat](javascript:Site.hoverQrCode("//50005592.s21i.huaweicloudsite.cn/2/ABUIABACGAAgiajntQYo_rqRxgMw6AI46AI.jpg",this,{"tips":"Scan QRcode"});){kind=link}